Degreasers

Dynamic Chain Cleaner kettingreiniger 400 ml

Degreasers

Dynamic Chain Cleaner kettingreiniger 400 ml

Dynamic Chain Cleaner is a high-pressure chain cleaning spray in a 400 ml can. You spray it onto the chain to loosen dirt and old lubricant.

What you get

  • 400 ml spray can
  • High-pressure chain cleaner
  • Dynamic brand

Why a degreaser?

Oil and dirt combine into a black paste that clings between the links and the teeth. That paste grinds, makes shifting worse and speeds up wear. A cloth removes the outside, but a degreaser also dissolves what sits between the pins and rollers.

A well-degreased drivetrain is also the base for a fresh layer of lubricant. New oil on a dirty chain attracts dirt immediately. Wax sticks poorly to a chain that still has oil on it, so anyone switching to wax needs to degrease first.

There are several kinds. Solvents are strong and fast. Citrus and biodegradable products are gentler on you and on the environment. Water-based (alkaline) cleaners suit anyone working indoors or using a lot. Aerosol sprays are handy for separate parts such as the cassette. The strongest is not always the best: choose what fits your materials and your workspace.

For the chain itself there are chain cleaners, small boxes of brushes that the chain runs through. Degreasing is faster and tidier with one. For a heavy clean, take the chain off and soak it in a jar.

Types of degreaser compared

Each type strikes its own balance between strength, safety and convenience. Strength also depends on the brand.

TypeStrength on greaseRinsingSafety and environmentSuits
SolventStrong, fastEvaporates or wipe off, follow the packVentilate, gloves, flammableHeavily soiled drivetrain
Citrus or biodegradableModerate to strongUsually with waterGentler on skin and environmentRegular upkeep
Water-based (alkaline)Moderate to strongRinse with waterNot flammable, wear glovesIndoor work, larger quantities
Spray canStrong on separate partsOften rinse with waterAvoid breathing the mist, ventilateCassette, chainrings, a quick job

A general guide. Products differ, so read the instructions and safety information on the pack.

Choose it if

  • You want to degrease your chain quickly before re-lubing it
  • You prefer a spray to a cleaning bath or tray
  • Your chain and cassette are covered in a black layer of oil and dirt.
  • You want to switch to wax or another type of lube.

Choose something else if

  • You want a washable solution without an aerosol
  • Your drivetrain is only lightly dirty. A cloth and a drop of lube are usually enough.
  • You have no safe place to work or to collect the waste liquid.

How to use a degreaser

  1. Protect the bike and yourself

    Work somewhere well ventilated or outside, wearing gloves. Cover discs, pads and rims with a cloth.

  2. Apply the degreaser

    Spray or pour the degreaser on the chain, cassette and chainrings. Use a chain cleaner for the chain if you have one.

  3. Let it work and brush

    Wait for the time in the instructions, usually a few minutes, and scrub between the teeth and links with a brush.

  4. Rinse or wipe off

    Follow the pack: some products rinse off with water, others wipe off dry. Make sure no dirty residue stays behind.

  5. Dry and re-lube

    Dry everything thoroughly, including the inside of the chain. Re-lube straight away, since a degreased chain has no protection left.

Good to know

  • Use the spray somewhere well ventilated and away from flames
  • Keep it off brake discs and braking surfaces, and re-lube the chain afterwards
  • Keep degreasers away from brake discs and pads. Residue spoils braking, and contaminated pads usually need replacing.
  • Do not spray into bearings, hubs or suspension. Degreasers wash out the grease that belongs there.
  • Test on paint, plastic and carbon if the product touches the frame. Some solvents attack them.
  • Do not pour used degreaser down the sink. Take it to a recycling centre or collect it in a tray.
Dynamic Chain Cleaner kettingreiniger 400 ml | compare prices