Road helmets

Cube Quest fietshelm

The CUBE Quest is a road helmet with fifteen ventilation openings and the SNAP 360 Fit system. The vents help on warm rides, and the system adjusts the helmet on your head.

What you get

15 ventilation openings
SNAP 360 Fit system
CUBE road helmet

Why a road helmet?

In a road crash your head is the most vulnerable part. A helmet absorbs some of the impact because the EPS (expanded polystyrene) foam under the shell compresses. Less force reaches your brain. The helmet must meet the European standard EN 1078, which tests shock absorption, strap strength and stability on the head, among other things. Look for the CE mark and the EN 1078 reference.

A road helmet is lighter and airier than a city helmet. Roughly 200 to 300 g is typical, with plenty of vents guiding air over your head. That keeps you cool at speed and on climbs. Aero models close up more and run warmer, but cut through the wind more efficiently.

Many helmets include MIPS or a similar system. An inner layer can move slightly relative to the shell to reduce rotational forces in an angled impact. That can help in some crashes, although the effect depends on the fall and the test. The system makes the helmet a bit warmer and heavier.

The best helmet is the one that fits well. A helmet that is too loose or sits crooked protects far less. Try several models if you can, because shapes differ. What suits one head shape may press on another.

The types of road helmet

Road helmets differ mainly in ventilation, weight and added protection.

Version	Weight	Ventilation	Note
Standard	About 220 to 300 g	Good, many vents	Meets EN 1078
With MIPS	About 250 to 330 g	Good, slightly warmer	Inner layer for rotational forces
Aero	About 280 to 350 g	Lower, warmer on climbs	Wind gain at high speed
Lightweight climbing helmet	About 180 to 230 g	Very good	Shell may be less robust

Weights are for a medium helmet and differ per model.

Choose it if

You ride a road bike and want a well-ventilated helmet
You want to fine-tune the fit with a dial system
You ride on the road and want a light, well-ventilated helmet you can wear for hours.
You are looking for a helmet that meets EN 1078 and sits comfortably.

Choose something else if

You want a helmet with MIPS or a visor; the title does not mention it
You ride mostly off-road. An MTB helmet with more rear coverage fits better.
You only make short city trips. A city helmet with more coverage may be more comfortable.

How to fit and adjust a road helmet

Measure your head
Wrap a tape measure about 2 cm above your eyebrows around the widest part of your head. The circumference sets the size, for example roughly 55 to 59 cm for M.
Place the helmet level
Set the helmet level on your head, about two fingers above your eyebrows. It must not tilt backwards or forwards.
Set the rear dial
Turn the dial at the back so the helmet sits firmly without pressure. Shake your head: it should barely move.
Adjust the straps
The straps form a V around your ears. Fasten the buckle so one finger fits between your chin and the strap.
Test the fit
Open your mouth wide: the helmet should pull down. Push it with your hand; it must not slide over your forehead or back of your head.

Good to know

Measure your head circumference and compare it with the size chart
Pick the right colour and size on the product page
Replace your helmet after any crash or hard knock, even if you see nothing wrong. The foam may be compressed with no visible damage.
Manufacturers usually advise replacing a helmet after about 3 to 5 years, because foam and straps age with sweat, sun and use.
Clean the helmet with mild soap and water, no solvents. Chemicals can attack the foam.
Store the helmet at room temperature, out of the sun. Do not leave it in a hot car.

What you get

Why a road helmet?

The types of road helmet

Choose it if

Choose something else if

How to fit and adjust a road helmet

Measure your head

Place the helmet level

Set the rear dial

Adjust the straps

Test the fit

Good to know

Also in this category