Bells

Fietsbel universeel zwart

This is a universal black bike bell for a 22 mm handlebar. The title lists no brand or model.

What you get

Universal bike bell
Colour black
For 22 mm handlebar

Why a good bell?

A bell is the simplest safety item on your bike. You announce yourself before passing someone, on a cycle path or a narrow towpath, without shouting. Nobody is startled and others can move over in time.

The sound is measured in decibels (dB). An ordinary bike bell usually reaches about 70 to 90 dB, and loud models get up to about 100 dB. You can hear the difference: more dB carries further and cuts through background noise. A bell that is too quiet is only heard by someone close by.

Belgian law requires a bell that can be heard from far enough away. The law names no fixed dB figure. Choose a bell with a clear, piercing tone and test it outdoors against traffic noise. A pretty bell with a weak sound is an ornament, not a warning.

A small bell weighs little and takes little space, so it fits on a sporty bike too. Many racers leave it at home, but if you ride in a group or on a busy cycle route, a bell makes you feel safer and more courteous.

The types of bike bell

The three types differ in sound, operation and fitting.

Type	Sound	Operation	Watch for
Ring bell	Clear, about 70 to 90 dB	Thumb flick, small and light	Must fit the bar diameter
Dome bell	Full, up to about 90 dB	Hammer or clapper, classic	Heavier and larger
Electronic bell	Loud, about 90 to 100 dB	Button, battery or rechargeable	Battery must work, rain

Loudness differs per model and is measured at a given distance.

Choose it if

Your bar is 22 mm and you want a plain black bell
You want an unbranded bell
You ride busy cycle paths, towpaths or in town and want to be heard.
You want to meet the obligation that a bike has a bell.

Choose something else if

Your bar is thicker or thinner than 22 mm: measure first
You ride mostly on a track or circuit with no pedestrians. A bell is of little use there.
You want an electronic bell but ride without a charger or spare battery. It stays silent when the battery is flat.

How to use a bike bell

Measure your handlebar
Most bars are around 22.2 mm (flat bar) or 31.8 mm (oversized). Check the diameter before you buy, because the clamp has to fit.
Choose a spot
Place the bell within reach of your thumb, next to the grip or brake lever. That way you ring without letting go of the bar.
Mount and tighten
Slide the clamp onto the bar and tighten the screw with a hex key. The bell should no longer turn, but do not overtighten on a carbon bar.
Test the sound
Ring a few times and ask someone to listen from a few metres away. With an electronic bell, check the battery as well.
Ring early and politely
Ring while you are still some distance from the person, and slow down. A short ding is often enough to get their attention.

Good to know

Check your bar diameter before ordering
The title gives no material, so look at the product photos
A bell with a dull sound may change because of dirt, rain or a loose part. Clean it and check the tone regularly.
A bell must not sit where it hinders steering or braking. After fitting, check that everything stays clear.
Electronic bells have batteries that run flat. Test them regularly, especially before a long ride.
On a carbon bar be careful with clamps. Use the recommended tightening torque and, if needed, a rubber shim.

What you get

Why a good bell?

The types of bike bell

Choose it if

Choose something else if

How to use a bike bell

Measure your handlebar

Choose a spot

Mount and tighten

Test the sound

Ring early and politely

Good to know

Also in this category