Front lights

Inlustro led-fietslichtset

Front lights

Inlustro led-fietslichtset

The Inlustro LED bike light set includes a front light and a red rear light.

What you get

  • Front light
  • Rear light
  • LED

Why a good front light?

In daylight a light is mostly there to be seen. A flash mode of 100 to 400 lumens stands out from a long way off. In the dark the light must also illuminate the road, and different figures apply.

The lumen figure is a first guide. For lit city streets 100 to 300 lumens is usually enough. For unlit roads you need 400 to 800 lumens. For gravel or MTB in the woods, 800 to 2,000 lumens is common. More is not always better: the beam should be wide and sharply cut off so you do not dazzle oncoming traffic.

Run time depends on the mode. Makers often quote far more on low than on high: 3 to 6 hours at full power and 20 to 60 hours on a low setting is typical. Look at the run time in the mode you will actually ride in.

Look at the mounting, charging (USB-C is handy) and waterproofing too, and at a road-legal beam if you ride on public roads. Rules on colour, beam and flash differ by country, so check what applies where you ride.

Lumens and run time

A guide to which brightness suits which use. Run times are at the highest setting.

UseLumens (approx.)Run time at full powerBeamSuits
Being seen100 to 300Usually 2 to 6 h, far more on lowWide, daytimeCity and commuting
Unlit road400 to 800Usually 2 to 5 hSharp cut-off, long reachWinter training
Gravel and woods800 to 1,500Usually 1.5 to 4 hWide and deepOff-road night rides
MTB downhill1,500 to 2,500 or moreUsually 1 to 3 hVery wideTechnical trails in the dark

Quoted lumens and run times are manufacturer figures. On a lower setting the light lasts much longer.

Choose it if

  • You want a complete light set.
  • You ride in town.
  • You ride at dusk or in the dark and want to see well.
  • You want a daytime flash mode to be noticed more easily.

Choose something else if

  • For off-road at night you need more power.
  • You only ride well-lit city streets: a simple light is enough.
  • You ride in a country with strict rules: check what is allowed on public roads.

How to use a front light

  1. Charge it

    Charge the light fully before you leave. On long rides carry a power bank or a spare light.

  2. Mount it firmly

    Fit the light to your handlebar or helmet with the supplied bracket. Tighten it so it does not slip.

  3. Aim the beam

    Aim it at the road a few metres ahead and never at oncoming eyes. Check this against a wall.

  4. Choose the right mode

    Use the highest mode in the dark or downhill and a lower mode to save battery.

Good to know

  • Lumens and battery are not in the title.
  • Check the mounting.
  • Keep the lens and contacts clean and dry.
  • Check the legal requirements for colour, beam and flash on public roads.
  • Cold shortens the run time of lithium batteries.
  • Recharge the light regularly, even if you rarely use it.

Also available as

The same product line with a different size or version, compared on price per unit.

VersionFrom
Standard set You are viewing this one€23.99
Set of 4€34.92
Inlustro led-fietslichtset | compare prices